Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual page 62

Chapter 4 Web Administrator: System Configuration
62
3 If you are using the H.323 protocol, the local Q931 port is 1720.
Enter a new port if the gateway is changed.
4 The local RAS port is 1718.
Enter a new port if the gateway is changed.
5 Select the Print H.323 Messages option to write those messages to
the OmniTouch Fax Server driver log files.
6 If you are using the SIP protocol, the default port is 5060.
Enter a new port if the gateway is changed.
7 Select the Print SIP Messages option to write those messages to
the OmniTouch Fax Server driver log files.
8 In the Option section, select Enable ECM to enable error
correction mode.
Error correction modes provides message redundancy and a means of
recovering lost packets in transmissions between the gateway and
the OmniTouch Fax Server driver.
9 In the Received Document Encoding field, select Group 4 (2d)
or Group 3 (1d). Group 4 is the default value.
10 Select the Terminal Resolution Capacity, either Low
(200x100), High (200x200), Fine (300x300) or Ultra Fine
(400x400). High is the default value.
11 Click OK.
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01