Configuring the T.38 gateway and gatekeeper options
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01
4 Select the Debug option to write additional debugging information to
the log file.
5 If you wish to change the display name of the host in the Web
Administrator, enter a new name in the Display Name field.
6 Click OK.
VOIP settings allow you to configure the H.323 protocol or the SIP
protocol. For H.323, you can specify both a primary and a secondary
gatekeeper. You can capture the messages generated by both
protocols. You can also enable error correction mode. The OmniTouch
Fax Server driver must be restarted to enable any changes entered
here.
1 In the Web Administrator, select Configuration|Driver.
The Options tab appears.
2 Select the T.38 tab.
Chapter 4 Web Administrator: System Configuration
61