Configuring 8950 AAA Operators
............................................................................................................................................................................................................................................................
Adding an Access Rule
How to add an Access Rule
You can add an Access rule from the Operators tab. In the Operator Properties Panel, as
shown in
Configuration dialog appears as shown in
Each access rule consists of three components:
Access Type defines the type of 8950 AAA object to which this rule applies.
•
File, Command, or Rule Pattern names the object or objects to which this Access Rule
•
applies.
Access Level defines the type of access this System Operator has to the objects.
•
To add an access rule, perform the following steps:
From the Operator Properties panel
•
+ or the Insert a record button.
Result:
Figure 11-9 Access Item Configuration Dialog
8. From the Access Type drop-down list, select an access type for this rule. There are
three access types available, namely, File, Command, and Role. They are described in
Table
Table 11-7 Access Rules–Access Type Component
Access Type
File Access Type
Command Access Type
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
Figure
11-8, click on the + or the Insert a Record action button. The Access Item
The Access Item Configuration dialog appears as shown in
11-7.
Figure
11-9.
(Figure 11-8 on page
11), click the button that has
Description
Controls access to configuration files. Also
controls access to the SMT panels that manage
data in the selected file.
Controls access to administrator interface
commands.
Adding an Access Rule
Figure
11-9.
11 - 1 3