Unit Id; Terminal Timeout; Date/Time; Alarm Relay - ADTRAN T3SU 300 User Manual

T3 service unit
Hide thumbs Also See for T3SU 300:
Table of Contents

Advertisement

Unit ID

Enter a name to identify the unit for management purposes.

Terminal Timeout

Set the amount of time the terminal or TELNET session can remain
inactive before requiring re-entry of the password for access. This
option can be disabled or set for 1 minute, 5 minutes, 15 minutes, 60
minutes, or one day.

Date/Time

Enter date and time information. Enter the time in military time
(separated by colons). Enter the month, date, and year (separated
by forward slashes). View this information in the S
menus.

Alarm Relay

Enable if the alarm terminal block (located on the rear of the unit) is
connected to an audible alarm. If enabled, the alarm circuit is
activated when a network alarm occurs.

Dialup Options

Configure the dialup capabilities of the T3SU 300. For product
version 1200217L1, this option is only available if a dialup selection
was made for the A
For product version 1200217L2, this option is always available. See
Figure 3-10. Descriptions of the individual fields of this menu
follow the figure.
61200217L1-1
P
M
UXILIARY
ORT
T3SU 300 User Manual
Chapter 3. Configuration
TATISTICS
(described on page 3-13).
ODE
3-19

Advertisement

Table of Contents
loading

Table of Contents