Terminal Menu And System Control; Selecting The Appropriate Menu; Security Levels - ADTRAN TOTAL ACCESS 600R User Interface Manual

Total Access 600R User Interface Guide (UIG)
2.

TERMINAL MENU AND SYSTEM CONTROL

Selecting the Appropriate Menu

The terminal menu is the access point to all other operations. Each terminal menu item has several functions and sub-
menus that identify and provide access to specific operations and parameters. Use the chart below to help select the
appropriate terminal menu.
To do this...
Review and monitor general system information for the Total Access 600R
Set up the operational configuration for the Total Access 600R
Upgrade firmware, do config transfers, ping, and access terminal mode
Define, configure, and monitor all Total Access 600R Router functions
Review and configure settings for the network interface and configure the DS0
maps

Security Levels

To edit terminal menu items, you must have a password and the appropriate security level. Table 1 describes the secu-
rity levels.
Security Level
5 Read-only permission for all menu items - minimum rights
4 Read permission for all menu items and permission to use test commands
3 Access to all commands except passwords, flash download, authentication methods,
interface configurations, and telnet security levels
2 Access to all commands except passwords, flash download, authentication methods, and
telnet security levels
1 Access to all commands except passwords and telnet security levels
0 Permission to edit every menu item, including creating and editing passwords - maximum
rights
Router Only Read access to all menus and write access to only the router menu
Page 20
Table 1. Password Security Level
Description
© 2002, ADTRAN, Inc.
Go to this menu...
S I
YSTEM NFO
S C
YSTEM ONFIG
S U
YSTEM TILITY
R
OUTER
M
ODULES
64200600L1#T-31A