Adding/Removing Users And Changing Password Security Levels - ADTRAN Total Access 850 System Manual

DLP-6 Adding/Removing Users and Changing Password Security
Levels
Introduction
Password security levels only apply to users connecting to the Total Access 850 system
through Telnet access. All connections made through the
maximum security rights.
All menu items in the Total Access 850 are protected by passwords of varying security levels. By assigning
different passwords to different security levels, the Total Access 850 System Administrator can control
which users can view or change various menu items. You can assign multiple passwords at the same access
level. This way, different users with the same access privileges can have different passwords. This
procedure details the steps which must be performed to add/remove user profiles and assign password
security levels in the Total Access 850.
Tools and Materials Required
• VT100 compatible terminal or PC with VT100 terminal emulation software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
64203376L1-1B © 2004 ADTRAN, Inc.
interface ALWAYS have
CRAFT
229