Featurephone- Basic Call Features - Mitel 1000 Owner's Manual

Featurephone– Basic Call Features
Making and Answering Calls
Making an external call.
There are two basic modes of operation available for making CO Line calls. In
the normal mode, which is the default, a line access digit (9 or 8) is dialed to
select a Line.
If Automatic Line selection is programmed you do not enter the line access
code.
Making an external call in normal mode
1. Press a Line Key to select a free line and when dial tone is returned dial
the external number.
2. Dial 9, (to select a CO Line) or Dial 8, (to select an IP Trunk). When dial
tone is returned dial the external number.
Making an external call with Automatic Line selection programmed
1. Press a Line Key to select a free line and when dial tone is returned dial
the external number.
2. Lift the handset, or use a Speakerphone Key, and dial the number. The
system automatically selects a free line and the number is dialed.
Making an external call in Pre-dial mode
If you do not lift the handset you may enter digits in Pre-dial mode by dialing 9
or 8 followed by the external number in normal mode or dial the external
number when Automatic Line selection is programmed. Digits will not be sent
to line until you lift the handset, press the Speakerphone key, or select 'Dial'
from the display.
You can edit the number you have entered prior to sending to the line, by
using the left-hand Keypad 'Edit Key', located below the keypad.
To make an internal call in normal mode
You can place an internal call in one of the following ways:
1. Select the 'Internal Call' option on the display and select the desired
extension from the list
2. Dial the extension number (20 – 23 or 31-34) and select 'Dial'.
3. Lift the handset and dial the extension number.
The display will show the extension number, or, if programmed, the
extension's name.
To make an internal call with Automatic Line selection programmed
1. Select the 'Internal Call' option on the display and select the desired
extension from the list.
The display will show the extension number, or, if programmed, the
extension's name.
41
Or
Or