Icom IC-7300 Quick Manual
Tri-city amateur radio club
Hide thumbs
Also See for IC-7300:
- Full manual (173 pages) ,
- Service manual (76 pages) ,
- Basic manual (72 pages)
Related Manuals for Icom IC-7300
Summary of Contents for Icom IC-7300
- Page 1 Tri-City Amateur Radio Club HF/50/70MHz Transceiver Getting Started with the Icom 7300 Quick Guide This is a brief set up document for the Icom 7300. Serial No. 02023063 Purchase Date: 14 September 2019...
- Page 2 IC-7300 Kit Contents Box – 1 IC-7300 Radio Box – 2 MFJ -4230 MVP Power Supply and Power Cord Daiwa CN-501H SWR Meter and 12 Volt power line ICOM Hand Microphone USB A/B cord Ground jumper PL-259 RF Jumper (Radio to SWR Meter)
- Page 4 Front Continued...
- Page 5 Rear...
- Page 6 Once all connections are complete turn on the power supply and press the “POWER” button on the IC-7300 for 1 second to turn on the radio. USB-B connector – to connect the radio to a PC use the USB A/B cable and connect the B side to the radio and the A side to the PC.
- Page 7 IC-7300 Radio Kit Connection Diagram Connect Antenna Feed Line into the ANT connector on the SWR meter Plug HF jumper into Antenna connector on the radio and the TR input on the SWR meter Connect the SWR meter power cord to the power...
- Page 8 Start up procedure for IC 7300 Radio 1. Once all connections are complete , turn on the power supply and press the “Power” button (1) to turn on the radio. 2. Press the “Menu” button (10) and the Menu screen will appear. 3.
- Page 9 4. To change the operational Mode of the radio, HF or Digital, press the “Menu” button and select the “SET” icon. Use the arrow slider on the right to go to page 3 and tap on the SD Card icon. Select the Digital or HF file and tap on the line.
- Page 10 BAND Select and Tuning the IC-7300 1. To select the desired Band touch the Frequency readout on the screen. A pop up window will open and you can tap on the desired Band. 2. To change Frequency simply rotate the Main Dial (18).
- Page 11 Additional functions of the IC-7300 Radio Please read the manuals for the IC-7300 prior to use. The Full manual is available on line, as a PDF. There are also many good videos on YOUTUBE that cover using the various modes of the IC-7300,that can be very helpful in learning how to use the radio.
-
Page 12: Functions- Settings
Icom 7300 set Menu Press set to Start FUNCTIONS– SETTINGS FUNCTION 1– 4 FUNCTION 5 – 8 50 % BEEP LEVEL MEMO PAD QUANTITY BEEP LEVEL LIMIT MAIN DIAL AUTO TS BEEP CONFIRMATION DEFAUL BAND EDGE DEEP MIC UP/DOWN SPEED... - Page 13 Icom 7300 set Menu Press set to Start CONNECTORS / DISPLAY SETTINGS DISPLAY CONNECTORS 1– 4 LCD BACKLIGHT 45 % ACC/USB OUTPUT SELECT DISPLAY TYPE ACC/USB AF OUTPUT LEVEL 82 % DISPLAY FONT ROUND ACC/USB AF SQL OFF (OPEN) METER PEAK HOLD...