Flow From Installation To Operation - Fujitsu Eternus DX60 User Manual

Chapter 2 Hardware
>

2.3 Flow from Installation to Operation

2.3 Flow from Installation to Operation
This section explains the flow of work from installation to the start of ETERNUS DX60/DX80
operation.
Contact your sales representative or maintenance engineer to perform the device installation and
setup, or follow the work flow shown below to perform the device installation and setup by your-
self:
1
2
3
4
(to next page)
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Preparation
1
Preparation
Prepare and check the following items:
- Acquire IP address (for ETERNUS DX60/DX80 and PC for maintenance engineer)
and check the subnet masks
- Prepare a web browser
- Prepare network devices such as a switching hub
IMPORTANT
The following manuals will be required.
"ETERNUS DX60/DX80 Disk storage system Safety Precautions"
"ETERNUS DX60/DX80 Disk storage system Package Contents"
"ETERNUS DX60/DX80 Web GUI User Guide"
"ETERNUS Disk storage systems Server Connection Guide"
2
Installation Location Requirements
Check the required space for the ETERNUS DX60/DX80, conditions and environment for the location,
and the number of power cords and the shape of the connector.
3
Package Contents Check
Refer to "ETERNUS DX60/DX80 Disk storage system Package Contents" and check
that there are no missing parts.
Installation
Attach the rack mount kit to the rack and install the ETERNUS DX60/DX80.
Standard Connection
Connect the following cables.
- LAN cable (For operation management)
- Fibre Channel cable (Fibre Channel model only)
- LAN cable (iSCSI model only)
- miniSAS cable (SAS model only)
- miniSAS cable (For connecting drive enclosures)
- Power cords
Device Settings (Preparation)
Perform the device settings. Prepare and check the following items.
- Enter the IP Address and Subnet Mask into the Network Setting Label
- Attach the Network Settings sticker to the Rear Upper Central Label Plate
- Connect the PC and the ETERNUS DX60/DX80 via LAN Cable (For operation management)
- Network Setting for PC
- Web Browser Setting
- Power on the Device
"4.1 Prior Preparation"
"3.1 Preparation"
"3.2 Rack Installation"
"4.2 Cable Connection"
"4.3.1 Preparation"
62
Copyright 2009 FUJITSU LIMITED