Fujitsu Eternus DX60 User Manual page 132

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
Procedure
1
2
3
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
In the GUI screen, click [Assign Hot Spare] under the [RAID Group
Management] menu on the [Configuration] tab.
The [Assign Hot Spare] screen appears.
Select the hot spare type and the disk to be used as hot spare, and click the
[Assign] button.
The following is a setting example when "Global Hot Spare" is selected.
When selecting "Dedicated Hot Spare" as the hot spare type, "Select an existing RAID
Group" appears.
Figure 4.25 [Assign Hot Spare] screen
A confirmation screen appears.
Click the [OK] button.
The hot spare is registered.
132
End of procedure
Copyright 2009 FUJITSU LIMITED