Fujitsu Eternus DX60 User Manual page 124

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
4
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Setup the host.
Specify information for the server being connected to the ETERNUS DX60/DX80.
Setting screens will vary depending on the ETERNUS DX60/DX80 model.
When the Host Affinity function is not used, the host setting is not
IMPORTANT
required.
For Fibre Channel
On the [Setup FC Host] screen, register the Fibre Channel card WWN for the server being
connected to the ETERNUS DX60/DX80.
When a FC switch is connected to the ETERNUS DX60/DX80,
IMPORTANT
settings for FC switch and the server (FC host) must be completed in
advance.
(1)
Click the [Add] button on the [Setup FC Host] screen.
(2)
Specify a WWN, server name, and host response.
Figure 4.17 [Setup FC Host] screen
(3)
Specify the other necessary items, and click the [OK] button.
The target FC host is displayed in the "Registered FC Host List" field.
(4)
Click the [Next] button.
A confirmation screen appears.
(5)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
124
Step 5 appears.
Copyright 2009 FUJITSU LIMITED