Fujitsu Eternus DX60 User Manual page 150

Chapter 4 Setup
> 4.4 Maintenance Setup
3-2
3-3
3-4
4
5
5-1
5-2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Select the checkbox of "The ServerView control code is added to the comment line of
the MIB definition file" in "Option", and click the [Download] button.
Figure 4.41 [Download MIB File] screen
A confirmation screen appears.
Click the [OK] button.
The MIB definition file for SeverView monitoring is downloaded. A screen to save the
downloaded MIB definition file appears.
Save the downloaded file.
Set ServerView.
Install and set ServerView on the Industry standard server side.
Refer to "ServerView User's Guide" that is provided with the Industry standard server to
install and set ServerView.
When registering the MIB information of an optional device, make
IMPORTANT
sure to specify "FJDARY-E60.MIB" that was exported in
Download the MIB definition file for SeverView monitoring.
Confirm notification for when an event occurs.
After setting up the ETERNUS DX60/DX80 and Industry standard server, sending trap
from the ETERNUS DX60/DX80 (SNMP Agent) to the Industry standard server (SNMP
Manager) can be confirmed by performing SNMP Trap Test.
Start GUI.
Click [Perform SNMP Trap Test] under the [Network Settings] menu on the [Global
Settings] tab in the GUI screen.
The [Perform SNMP Trap Test] screen appears.
150
Step 3
Copyright 2009 FUJITSU LIMITED