Fujitsu Eternus DX60 User Manual page 187

Appendix A Specifications
> A.1 Base Device Specifications
Disk (*1)
Dimensions
(W × D × H)
Service area requirements
Maximum weight (*1)
Power
Maximum power consumption
(*1)
Maximum heat generation (*1)
Environmental
conditions
Noise emission
*1: This value is for maximum configuration (when optional devices are installed to the utmost limit)
*2: Physical capacity is calculated based on the assumption 1TB=1,000GByte, 1GB=1,000MByte.
*3: Logical capacity is calculated based on the assumption 1TB=1,024GByte, 1GB=1,024MByte and
being formatted in the recommended RAID5 configuration. The possible capacity for use depends on
the environment conditions.
*4: The controller module is not duplicated. Therefore, if a problem occurs, operation may not be
continued.
*5: Value for a single controller enclosure.
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Item
Capacity/
Speed
SAS disks
Drive
interface
Capacity/
Speed
Nearline
SAS disks
Drive
interface
Basic
Maximum (*1)
Voltage
Phase
Frequency
AC 100 –
120V
AC 200 –
240V
AC 100 –
120V
AC 200 –
240V
Temperature
Humidity
Sound Power Level (LWAd)
Sound Pressure Level
(LpAm)
187
Specification
2-port single-controller
model (*4)
450GB/300GB (15,000rpm)
SAS (up to 3Gbps)
1TB/750GB (7,200rpm)
SAS (up to 3Gbps)
483 × 650 × 88 (mm) [2U]
483 × 650 × 178 (mm) [4U]
Front: 800mm or larger, Rear: 800mm or larger
70kg
AC 100 – 120V, AC 200 – 240V
Single
50Hz/60Hz
782W
776W
2,816kJ/h
2,794kJ/h
5 – 40°C (operating)
20 – 80%RH (operating)
5.9B (*5)
42.0dB(A) (*5)
Copyright 2009 FUJITSU LIMITED
4-port dual-controller
model