Fujitsu Eternus DX60 User Manual page 86

Chapter 4 Setup
> 4.2 Cable Connection
Procedure
1
2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Connect the LAN cable to the ETERNUS DX60/DX80.
Connect the LAN cable connectors to the MNT ports of the controller 0 (CM#0) and
controller 1 (CM#1) for the ETERNUS DX60/DX80.
CAUTION
•
Connect the LAN cables to the networking equipment.
Connect the other end of the LAN cable to the networking equipment, such as hub or
networking
router. For equipment connection details, refer to the documentation for the
networking
equipment being connected to.
Do
When connecting the LAN cables, position them so that they
will not obstruct replacement of the power supply unit or
controllers by the maintenance engineer.
86
Copyright 2009 FUJITSU LIMITED