Fujitsu ETERNUS DX60 Setup Manual

Setup Guide (SAS model)
Read this Setup Guide first
Read and understand the "Safety Precautions"
before use.
"Safety Precautions"
The company names, product names and service names mentioned in this document are registered trademarks or trademarks of their respective companies.
The latest version of this document and the latest information about the ETERNUS DX60/DX80 is released in the following web-site. Access the following address if needed.
http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/dx-entry/
Preparation
S T E P
Package Contents Check
Refer to the "Package Contents" and check that there are no missing items.
ETERNUS DX60/DX80

Rack mount kit

"Package Contents"
Installation and Connection Preparation
Installation space
Check that the installation area meets the space requirements
of the rack in which the ETERNUS DX60/DX80 is to be installed.
Installation requirements
Check that the installation area satisfies all the requirements
described in the "Instructions for installation" section of the
"Safety Precautions".
Environmental conditions
Temperature: 5 – 40°C, Humidity: 20 – 80%RH
Power outlets
Check that a sufficient number of suitable wall outlets are
available.
"5.1 Installation Preparation" in the "User Guide"
n
"6.1 Connection Preparation" in the "User Guide"
n
"Safety Precautions"
n
This guide describes the workflow required to proceed from installation to
operation of the
Misc. documents

Misc. cables

Disk storage system
(SAS model).
Workflow
1
Preparation
2 Installation
3 Cable Connection
4 Startup
Prepare the following manuals:
Documentation CD
n
"Safety Precautions"
n
"Package Contents"
n
Other related manuals, for example, for a server or
n
networking equipment.
When ETERNUS SF Express is used, prepare the following
software and User's Guide:
ETERNUS SF Express Media Pack
n
"ETERNUS SF Express User's Guide"
n

Setup Preparation

Completing and attaching the Network Settings label
Complete the following information in the Network Settings
label and attach it on the ETERNUS DX60/DX80.
IP address and subnet mask for the ETERNUS DX60/
n
DX80
IP address for maintenance work
n
Settings for the PC
Setup Network Environment
n
IP address:

Subnet mask: 255.255.255.0

Set the Web browser
n
Proxy server and Cache : Disable

Java Script, style sheets, and cookies : Enable

P3AM-3102-04EN
5
Basic Setup
6 Monitoring Setup
7 Server Connection
8 Operation and Maintenance
Copyright 2010 FUJITSU LIMITED
192.168.1.2
"7.1 Setup Preparation" in the "User Guide"
Proceed to
next step