Fujitsu Eternus DX60 User Manual page 107

Chapter 4 Setup
> 4.2 Cable Connection
6
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
CAUTION
•
Turn the main line switch of the AC outlet box to the "On" position (marked "I").
Main Line Switch
When turning the main line switch to "On" (marked "I") right after
IMPORTANT
turning the main line switch to "Off" (marked "O"), turn it back to "On"
(marked "I") after the STATUS LED of the power unit has turned off
completely.
(It takes about ten seconds for the POWER STATUS LED to be
turned off completely.)
Unplug
If the ETERNUS DX60/DX80 is not going to be used for a
long period of time, it is advisable to unplug all power cords to
avoid any chance of fire to the ETERNUS DX60/DX80 and its
peripherals.
107
End of procedure
Copyright 2009 FUJITSU LIMITED