Fujitsu Eternus DX60 User Manual page 118

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
3-2
4
4-1
4-2
5
5-1
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Click the [OK] button.
The machine name is set, and the [Change Password] screen appears.
Change the password.
Change the initial account password.
Set the necessary parameters in [Set Password], and click the [Next >] button.
Figure 4.11 [Change Password] screen
A confirmation screen appears.
Click the [OK] button.
The password is changed, and the [Setup Network Environment] screen appears.
Set the network environment.
Set the ETERNUS DX60/DX80 environment for network communication.
Set the necessary parameters such as a MNT port IP address, subnet mask and
default gateway, and click the [Next >] button.
The appropriate IP address or network address must be set in the
"Allowed IP List" to allow access from a device in a network other
that in which the ETERNUS DX60/DX80 resides.
Devices in the same network as the ETERNUS DX60/DX80 are
allowed access even if not set in the "Allowed IP List".
118
Copyright 2009 FUJITSU LIMITED