Fujitsu Eternus DX60 User Manual page 128

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
(2)
Assign the affinity group to the server, and click the [Set] button.
Figure 4.22 [Define LUN Mapping] screen 2 (when the Host Affinity function is used)
A confirmation screen appears.
(3)
Click the [OK] button.
The affinity group is created, and the screen returns to the screen displayed in
Set other affinity groups as required.
(4)
Click the [Exit] button.
The settings are reflected, and a message to confirm finishing the Configuration Wizard
appears.
When the Host Affinity function is not used
Correspond the volume number to the LUN that can be recognized by the server for ports.
(1)
Select the port and click the [Edit] button to change the setting.
Figure 4.23 [Define LUN Mapping] screen 1 (when the Host Affinity function is not
used)
128
Step (1).
Copyright 2009 FUJITSU LIMITED