Fujitsu Eternus DX60 User Manual page 164

Chapter 5 Installing Optional Products
> 5.1 Disk Installation
6-4
7
8
9
10
11
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Check that the newly installed disk's STATUS LED lights up green after approximately
30 seconds.
Repeat Step 5 and Step 6
Remove the wrist strap.
Re-attach the front cover.
Refer to "2.2.3 Attaching and Removing the Front Cover" (page 58)
procedure.
On the Storage System Status screen of GUI, check that the added disks have
been recognized.
Set up RAID groups, volumes, hot spares, and Host Affinity settings on the new
disks, as required.
for each additional disk.
164
for the appropriate
End of procedure
Copyright 2009 FUJITSU LIMITED