Fujitsu Eternus DX60 User Manual page 123

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
3
3-1
3-2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Create a volume.
Create a volume (area in the disks in the RAID group) in a RAID group.
If the factory default settings are to be used, this setting is not
IMPORTANT
required. When settings are desired, delete the factory settings
(logical volumes and LUN mappings) and then create your own
logical volumes. For setting deletion details, refer to the "ETERNUS
DX60/DX80 Web GUI User Guide".
CAUTION
•
Specify the necessary items in "New Volume", and click the [Create] button.
Figure 4.16 [Create Volume] screen
A confirmation screen appears.
Click the [OK] button.
The volume is created, and the [Define Host] screen appears.
Do Not
RAID groups, volumes, and hot spares are factory set. Disks
which contain RAID groups or volumes, or disks which are hot
spares should not be moved to another slot.
123
Copyright 2009 FUJITSU LIMITED