Attaching And Removing The Front Cover - Fujitsu Eternus DX60 User Manual

Chapter 2 Hardware
> 2.2 Standard Operations
2.2.3

Attaching and Removing the Front Cover

This section explains how to attach and remove the front cover of the controller enclosure or
drive enclosure.
Attaching the front cover
Attach the front cover in the following order.
Procedure
1
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Do
CAUTION
• After completing the operation, be sure to reattach the front cover.
This section explains how to attach and remove the front cover of the
controller enclosure, but the same procedure is used to attach and remove
the front cover of the drive enclosure.
Fit the front cover in the left end slot of the controller enclosure to attach.
Be careful so that the part of the front cover to be fit in the slot does
IMPORTANT
not touch the power switch (
Slot
).
58
Copyright 2009 FUJITSU LIMITED