Chapter 4 Setup
>
4.4 Maintenance Setup
4.4.3
Event Notification Setup
Set how to notify of an event and its level when a problem occurs in the ETERNUS DX60/DX80.
Refer
Procedure
1
2
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
•
Is ServerView set correctly to monitor the ETERNUS DX60/DX80?
•
Is the notification receiver of ETERNUS DX60/DX80's SNMP trap set correctly?
Start GUI and check if ServerView management device's IP address is set correctly in the
Trap setting of [Setup SNMP Agent].
There are three methods to notify of an event: E-Mail, SNMP trap, and host
sense.
When notifying of an event by E-mail, "Setup E-Mail Notification" must be
set. When notifying of an event by the SNMP trap, "Setup SNMP Agent"
must be set. Refer to "ETERNUS DX60/DX80 Web GUI User Guide" for
details of the settings.
"ETERNUS DX60/DX80 Web GUI User Guide"
Start GUI.
Click [Setup Event Notification] under the [Network Settings] menu on the
[Global Settings] tab in the GUI screen.
The [Setup Event Notification] screen appears.
152
End of procedure
Copyright 2009 FUJITSU LIMITED