Fujitsu Eternus DX60 User Manual page 189

Appendix A Specifications
> A.1 Base Device Specifications
Power
Maximum power consumption
(*1)
Maximum heat generation (*1)
Environmental
conditions
Noise emission
*1: This value is for maximum configuration (when optional devices are installed to the utmost limit)
*2: Physical capacity is calculated based on the assumption 1TB=1,000GByte, 1GB=1,000MByte.
*3: Logical capacity is calculated based on the assumption 1TB=1,024GByte, 1GB=1,024MByte and
being formatted in the recommended RAID5 configuration. The possible capacity for use depends on
the environment conditions.
*4: The controller module is not duplicated. Therefore, if a problem occurs, operation may not be
continued.
*5: Up to five SSDs can be installed in the single controller model, and up to nine SSDs can be installed in
the dual controller model.
*6: Value for a single controller enclosure.
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Item
Voltage
Phase
Frequency
AC 100 –
120V
AC 200 –
240V
AC 100 –
120V
AC 200 –
240V
Temperature
Humidity
Sound Power Level (LWAd)
Sound Pressure Level
(LpAm)
189
Specification
2-port single-controller
model (*4)
AC 100 – 120V, AC 200 – 240V
Single
50Hz/60Hz
3,774W
3,805W
13,587kJ/h
13,698kJ/h
5 – 40°C (operating)
20 – 80%RH (operating)
5.9B (*6)
42.0dB(A) (*6)
Copyright 2009 FUJITSU LIMITED
4-port dual-controller
model