Replacing Lan Cards / Iscsi Hbas - Fujitsu Eternus DX60 User Manual

Chapter 6 Operation and Troubleshooting
> 6.4 Post Start-of-Operation Changes to the Configuration
6.4.2

Replacing LAN Cards / iSCSI HBAs

The following explains how to replace a failed LAN card or iSCSI HBA.
Note that this is only an overview of the replacement procedure. Refer to the relevant manuals
for more details.
Refer
The procedure to replace a LAN card / iSCSI HBA is as follows:
Procedure
1
2
3
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
User guide for LAN card / iSCSI HBA
"ETERNUS Disk storage systems Server Connection Guide (iSCSI)"
"ETERNUS DX60/DX80 Web GUI User Guide"
"ETERNUS DX60/DX80 Command Line Interface (CLI) User's Guide"
Turn off the server whose LAN card or iSCSI HBA is to be replaced.
Replace the LAN card / iSCSI HBA.
Refer to the documentation supplied with the LAN card or iSCSI HBA for the detailed
replacement procedure.
When the setting is complete, confirm that the server can access the ETERNUS
DX60/DX80.
176
End of procedure
Copyright 2009 FUJITSU LIMITED