Chapter 6 Operation and Troubleshooting
>
6.5 Troubleshooting
6.5.2
Trouble Record
If trouble occurs, record the ETERNUS DX60/DX80 conditions in
contact your maintenance engineer.
Figure 6.2
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
Trouble Record
1: Please identify your ETERNUS DX60/DX80 Disk storage system:
(Check the Manufacturer's label)
MODEL
SER.NO.
2: Please enter the following information about your
ETERNUS DX60/DX80:
Number of drive enclosures
Number of disks
3: Are you using a UPS? If so, what model?
4: Are you using a PMAN? If so, what model?
5: What is the state of the following Controller Enclosure LEDs?
POWER
(Yes, No)
READY
(Yes, No)
FAULT
(Yes, No, Blinking)
IDENTIFY
(Yes, No)
CACHE
(Yes, No, Blinking)
6:
What is the state of the following Drive Enclosure LEDs?
POWER
(Yes, No)
READY
(Yes, No)
FAULT
(Yes, No, Blinking)
IDENTIFY
(Yes, No)
Trouble record (1/2)
184
Figure 6.2
and
Figure
6.3, and
Copyright 2009 FUJITSU LIMITED