Fujitsu Eternus DX60 User Manual page 134

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
For iSCSI
On the [Set iSCSI Port Parameters] screen, set the information for the connection (detailed
iSCSI port information) between the ETERNUS DX60/DX80 iSCSI port and the server.
Procedure
1
2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
• Host Affinity
When the Host Affinity function is used, select "Enable".
When the Host Affinity function is not used, select "Disable".
• Host Response
When "Disable" is selected in "Host Affinity", set this item.
Figure 4.26 [Set FC Port Parameters] screen
In the GUI screen, click [Set iSCSI Port Parameters] under the [Host I/F
Management] menu on the [Global Settings] tab.
The [Set iSCSI Port Parameters] screen appears.
Select a port and specify the necessary items in "
button.
• TCP/IP Settings
Input the IP address and subnet mask for the selected iSCSI port.
• iSCSI Settings
Input the iSCSI name and alias name.
Select
134
End of procedure
Port", and click the [Set]
Copyright 2009 FUJITSU LIMITED