The Web Management Interface; What Is The Web Management Interface; To Run The Web Management Interface; Summary - HP StorageWorks D2D100 - Backup System User Manual

7 The Web Management Interface

In this chapter:
• "Web management
• "To run the Web Management
• "Summary
• "Devices
(Configuration)" on page 90
• "Cartridges
• "Network
• "Email Alerts
• "iSCSI (Status)" on page 104
• "Log (Status)" on page 105
• "Status (Replication)" on page 107
• "Mapping Configuration
• "Appliance
• "Local Settings
• "Event History
• "Shutdown
• "Admin (Settings)" on page 114
• "Date and Time
• "Firmware
• "Support (Settings)" on page 118

What is the Web Management interface?

The Web Management Interface is the main interface for:
• Monitoring the status and health of the HP D2D Backup System and all configured backup devices
• Changing the number of cartridge slots or creating additional libraries, or standalone tape
drives, for a host
• Managing movement of data to and from a physical tape drive attached to the HP D2D (if
one has been installed)
• Creating slot mappings and configuring replication, if required

To run the Web Management Interface

There are two ways of logging on:
• From the host server or PC: Use the desktop shortcut created by the Installation wizard.
• From any machine connected to the network: The HP D2D uses a secure network connection.
Enter https:// followed by the IP address or fully qualified domain name (for example,
myhpd2d.mydomain.com) of the HP D2D Backup System into the web browser.
NOTE:
If you use http: in the URL, you are automatically forwarded to the https: secure network connection.
interface" on page 87
Interface" on page 87
(Home)" on page 88
(Configuration)" on page 94
(Configuration)" on page 97
(Configuration)" on page 100
(Replication)" on page 107
(Replication)" on page 110
(Replication)" on page 112
(Replication)" on page 113
(Settings)" on page 116
(Settings)" on page 115
(Settings)" on page 117
D2D Backup System HP D2D2503
87