Basic Settings - Aastra 6730i Administrator's Manual

6700i series, 6800i series, 9000i series
Hide thumbs Also See for 6730i:
Table of Contents

Advertisement

Administrator Level Options

Basic Settings

An Administrator has access to specific Basic Setting options to configure and manage the IP Phone in the network. The
following sections identify the options available to an Administrator only, or where indicated, to a User and Administra-
tor. These tables also identify whether you can configure them using the Aastra Web UI, IP Phone UI, or the configuration
files.
General Settings
Parameter in
Parameter in Configuration
Aastra Web UI
Files
Local Dial Plan
sip dial plan
Send Dial Plan Terminator
sip dial plan terminator
Digit Timeout
sip digit timeout
Park Call
sip lineN park pickup config
Note:
This option can be set by both
Users and Administrators.
Pick Up Parked Call
sip lineN park pickup config
Note:
This option can be set by both
Users and Administrators.
N/A
suppress dtmf playback
Display DTMF Digits
display dtmf digits
Note:
This option can be set by both
Users and Administrators.
Play Call Waiting Tone
call waiting tone
Note:
This option can be set by both
Users and Administrators.
Stuttered Dial Tone
stutter disabled
Note:
This option can be set by both
Users and Administrators.
3-16
Description
A dial plan that describes the number and pattern of digits that a user dials to reach
a particular telephone number. Dial Plan field accepts up to 512 characters.
For more information on this feature, see
Specifies whether or not pressing the hash/pound (i.e. "#") key, while performing an
outgoing call on an open line, should be sent as %23 to the proxy in the dial string or
if the key should be used as a dial plan terminator (i.e. dials out the call immediately).
For more information on this feature, see
Represents the time, in seconds, to configure the timeout between consecutive key
presses.
For more information on this feature, see.
The parking of a live call to a specific extension.
This feature on the Basic Preferences screen is available on all phones EXCEPT
the 9143i, 6753i, 6863i, and 6865i.
To configure the Park feature on a key, see Chapter 5, the section,
and Programmable Configuration"
Picking up a parked call at the specified extension.
This feature on the Basic Preferences screen is available on all phones EXCEPT
the 9143i, 6753i, 6863i, and 6865i.
To configure the Pickup feature on a key, see Chapter 5, the section,
Static and Programmable Configuration"
Enables and disables suppression of DTMF playback when a number is dialed from
the softkeys or programmable keys.
For more information on this feature, see.
57.
Enables and disables the display of DTMF digits on the IP phone display during a con-
nected state.
For more information on this feature, see.
Enable or disables the playing of a call waiting tone when a caller is on an active call
and a new call comes into the phone.
For more information on this feature, see.
Enable or disables the playing of a stuttered dial tone when there is a message wait-
ing on the IP phone.
For more information on this feature, see.
"Local Dial Plan"
on page 5-54.
"SIP Dial Plan Terminator"
on page 5-55.
"Digit Timeout"
on page 5-55.
"Park/Pick Up Static
on page 5-184.
"Park/Pick Up
on page 5-184.
"Suppressing DTMF Playback"
"Display DTMF Digits"
on page 5-57.
"Call Waiting Tone"
on page 5-60.
"Stuttered Dial Tone"
on page 5-63.
41-001343-02 REV05 – 07.2014
on
page 5-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents