HP StorageWorks 8B - FC Entry Switch User Manual page 49

Search Mem
Add Mem
Remove Mem
Add WWN
Ref Zone
A/D WWN
Rpl WWN
OK
Apply
Close
Clr All
Quick Loop
You can use the QuickLoop tab to create and manage QuickLoops if used in conjunction with
Zoning. For information on managing the QuickLoop feature separately, see Loop Tab in this
document.
The Quick Loop tab is shown in Figure 3-15.
Web Tools User's Guide
Click to search for a Switch name, WWN, Alias, Zone, QuickLoop, in
the Member Selection List based on the type of objects displayed in
that list.
Click to add a member from the Member Selection list into the Zone
Member contents.
Click to remove a member from the Zone Member list.
Click to add a WWN that is not currently part of the Fabric.
Click to refresh the local zoning data base copied from the switch.
This button automatically flashes red/gray if the fabric zoning data is
changed by another client.
Click to add or delete a WWN to or from all the aliases, zones defined
Click to replace WWN with another one in all aliases, zones defined.
Click to apply the changes to the switch and exit the switch.
Click to apply the changes to the switch.
Click to exit the window without making any changes to the switch.
Click to clear all aliases, zones, configs locally on the switch.
3
Fabric View
3-27