HP StorageWorks 8B - FC Entry Switch User Manual page 38

3
Fabric View
Add Mem
Remove Mem
[Zone name]
Members
Ref Zone
A/D WWN
Rpl WWN
OK
Apply
Close
Clr All
3-16
Select to add the member selected in the Member Selection List to the
Zone Members list. If an entire switch is selected, all ports on the switch
are added to the zone. You can also select individual ports. To add a device
WWN, select either a node WWN (folder icon) or port WWN (blue circle
icon) from the WWNs sub-tree. To add an alias to the zone, select it from
the Aliases sub-tree (the alias must already exist).
Select to remove the selected member from the Zone name Members list.
This field lists members of the zone selected in the Zone Name field. The
name of this list depends on the name of the selected zone. If no zone is
selected, the name displays as "null Members".
Click to refresh the local zoning data base copied from the switch. This
button automatically flashes red/gray if the fabric zoning data is changed
by another client.
Click to add or delete a WWN to or from all the Aliases, Zones defined.
Click to replace a WWN with another one in all Aliases, Zones defined.
Applies the changes to the switch and exits the frame.
Click to apply all changes made since the Zone Administration View was
opened, including changes made on other tabs in the view. Changes cannot
be cancelled once they are applied.
Click to exit the window without making any changes to the switch.
Click to clear all Aliases, Zones, Configs locally on the switch.
Web Tools User's Guide