HP StorageWorks 8B - FC Entry Switch User Manual page 65

Add Mem
Remove Mem
Add Other
Ref Zone
A/D WWN
Rpl WWN
OK
Apply
Close
Clr All
Web Tools User's Guide
Click to add a member from the Member Selection List into the Zone
Member contents.
Click to remove a member from the zone member list when selected.
Click to add a switch/port, WWN or a device that currently is not part
of the Fabric.
Click to refresh the local zoning data base copied from the switch.
This button automatically flashes red/gray if the fabric zoning data is
changed by another client.
Click to add or delete a WWN to or from all the aliases, zones
defined.
Click to replace WWN with another one in all aliases, zones defined.
Click to apply the changes to the switch and exit the switch.
Click to apply the changes to the switch.
Click to exit the window without making any changes to the switch.
Click to clear all aliases, zones, configs locally on the switch.
3
Fabric View
3-43