Telnet Interface - HP StorageWorks 8B - FC Entry Switch User Manual

4
Switch View

Telnet Interface

Only one Telnet session can be active at a time.
Note:
To access the Telnet Interface:
1. Launch the Web browser.
2. Enter the switch name or IP address in the Location/Address field and press Enter. For
example: http://switch name/.
Web Tools launches, displaying Fabric View.
3. Click the Telnet icon on the switch panel.
If a Telnet session is already active, the following message displays as shown in Figure 4-16.
Figure 4-16 The Telnet Session in Use message
4. If this message displays and you want to abort the active session, click Abort Session.
Otherwise, click Cancel.
If there is no active session or it has been aborted, the following dialog appears as shown in
Figure 4-17.
Figure 4-17 The Telnet Interface
4-64
The Telnet Interface requires administrative privileges. Once an administrative login is
entered, administrative privileges remain available until the Web browser is exited.
Web Tools User's Guide