The Name Server Table Also Includes The Following Columns; Zone Administration View - HP StorageWorks 8B - FC Entry Switch User Manual

3
Fabric View

The Name Server Table also includes the following columns:

Domain #
Port #
Port ID
Port Type
Port WWN
Node WWN
Symbolic Name
FC4 Types
COS
Fabric Port Name
Port IP Address
Hard Address
Member of Zones

Zone Administration View

Administrative privileges are required to access this view. Use Zoning to setup barriers between
different operating environments as needed for reasons of security, maintenance, or testing.
Note:
Accessing the Zone Administration View:
1. Launch Web Tools, displaying Fabric View
2. Select the Zone Admin icon.
For more information, see Button and Icons that appear in Fabric View on page 3-3.
A prompt displays requesting User Name and Password.
3. Enter User Name and Password.
4. Select OK.
3-10
The domain ID of the switch to which the device is connected.
The number of the switch port to which the device is connected.
The port ID of the device (24-bit hexadecimal value).
The port type of the device (N for fabric direct attached port or NL for
fabric direct attached loop port).
The worldwide name of the device port.
The worldwide name of the device node.
The symbolic name of the device assigned through the SCSI INQUIRY
command.
The Fibre Channel FC4 layer types supported by the device, such as IP
or FCP.
The Fibre Channel classes of service supported by the device.
The name of the fabric port in use by the device.
The IP address of the fabric port.
The hard address of the fabric port.
The zones to which this device belongs. This column does not update
when the table is refreshed. To view updated zoning information, close
and reopen the Name Server Table.
The following section is intended to describe Zoning configurations when using Web Tools
specifically. For more detailed information about Zoning, see the Zoning User's Guide.
Web Tools User's Guide