Loop Tab - HP StorageWorks 8B - FC Entry Switch User Manual

5
Port View

Loop Tab

The Loop tab provides information about any loop on the port, including the following:
•
Loop statistics
•
Local AL_PA statistics
•
QuickLoop looplet statistics (if the port is a member of the QuickLoop)
•
QuickLoop statistics (if the port is a member of the QuickLoop)
If the port is not a loop-enabled port, the following information displays:
"Not an L_Port. No loop info available." The Loop tab is shown in Figure 5-4.
Figure 5-4
Following is a description of the fields on the Loop tab:
FL Port Transfer
FL Tenancies
NL Tenancies
QL/Zone Inits Caused
Successful QL/Zones Inits
Number of Failed QL/Zone
Inits
Times Being Bypassed
5-8
The Loop tab in the Port Information View
Displays number of times FL_Port used transfer state.
Displays the number of times FL_Port opens loop tenancy.
Displays the number of times NL_Port opens loop tenancy.
Displays number of times looplet has caused QuickLoop to be
initialized.
Displays number of times looplet has successfully initialized.
Displays number of times looplet failed to successfully
initialize.
Displays number of times looplet was not included as part of
QuickLoop.
Web Tools User's Guide