Portstats Tab - HP StorageWorks 8B - FC Entry Switch User Manual

Following is a description of the fields that are visible in Port Information View, regardless of
which tab is selected.
Port World Wide Name
Port Module
Port Status
Port Type

PortStats Tab

The PortStats tab provides information about transmission speed, reception speed, and the volume
of traffic through the selected port. The PortStats tab is shown in Figure 5-2.
Web Tools User's Guide
World Wide Name (WWN) of this port.
The GBIC type, as follows:
•
-- No GBIC present
•
SW Short wave GBIC
•
LW Long wave GBIC
•
SWID Short wave serial ID GBIC
•
LWID Long wave serial ID GBIC
The current status of the port.
•
No_Module No GBIC module is in this port.
•
No_Light Module is not receiving light.
•
No_Sync Module is receiving light but out of
sync.
•
In_Sync Module is receiving light and in sync.
•
Laser_Flt Module signaling a laser fault (defective
GBIC).
•
Port_Flt Port is marked faulty (defective GBIC,
cable, or device).
•
Diag_Flt Port failed diagnostics.
•
Online Port is up and running.
•
Lock_Ref Port is locking to reference signal.
Note:
Removing a cable from an E_Port temporarily
generates errors, causing the status to show as
faulty. The status returns to healthy when the
sample interval has passed (the default interval is
1 minute).
The type of port.
•
E_Port Switch link port
•
G_Port Generic port
•
U_Port Universal port
•
F_Port Fabric port
•
FL_Port Fabric loop port
•
L_Port Loop port
5
Port View
5-3