License Administration Tab - HP StorageWorks 8B - FC Entry Switch User Manual

Recipient
Access Control List
Access Control List Configuration
Access Host
Access Control List
OK
Apply
Close
Reset

License Administration Tab

You can use the License Administration tab to install license keys that are provided. You can use
the table within the Licence Administration tab to remove a listed license from the switch. The
License Administration tab is shown in Figure 4-6.
Web Tools User's Guide
Displays the IP address of the Trap Recipient. A trap recipient
receives the message sent by an SNMP agent to inform the SNMP
management station of a critical error.
Displays the Read/Write access of a particular community string.
Read only access means that a member of a community string has the
right to view, but cannot be changed. Read/Write access means that a
member of a community string can be both viewed and make
changed.
Displays the IP address of the host of the access list.
Displays the Read/Write access of a particular access list. Read only
access means that a member of an access list has the right to view, but
cannot make changes. Read/Write access means that a member of an
access list can both view and make changes.
Click to save the changes made to the tab and to exit the tab.
Click to save the changes made to this tab and to stay in the current
tab. Additional changes can be made and the Apply button pressed
when making changes incrementally.
Click to exit the current tab. If changes have been made but not
committed by clicking the Apply button, a dialog box displays.
Click to reset the tab to the last set of committed changes. If the
Apply button has not been pressed on this tab, the parameters are
returned to the original values the tab had when it was initially
displayed.
4
Switch View
4-47