HP StorageWorks 8B - FC Entry Switch User Manual page 126

4
Switch View
The following is a description of the fields on the Configure tab:
BB Credit
E_D_TOV
R_A_TOV
Datafield Size
Non-SCSI Tachyon
Mode
Per-Frame Routing
Priority
Suppress Class F
Traffic
Disable Device
Probing
VC Encoded Address
Mode
Virtual Channel
Parameters
Send Fan Frames
Always Send RSCH
Do Not Allow AL_PA
0x00
rstatd
rapid
rusersd
RLS Probing
4-54
Displays the number of buffers that are available to attached devices
for frame receipt.
Displays the Error Detect Time Out Value in milliseconds. This timer
is used to flag a potential error condition when an expected response is
not received within the set time.
Displays the Resource Allocation Time Out Value in milliseconds.
This variable works withe the E_D_TOV to determine switch actions
when presented with an error condition.
Specifies in bytes, the largest possible data field size.
When set, the virtual channel ID is used in conjunction with a frame
header to form the final virtual channel ID.
Only applies if VC Encoded Address Mode is also set. When set,
translative addressing is disabled.
When set, devices that do not register with the Name Server are not
present in the Name Server data base. Set this mode only if the switch
N_Port discovery process (PLOGI, PRLI, INQUIRY) causes an
attached device to fail.
When set, the frame source and destination address use an address
format that is compatible with FC16 switches. Set this mode only if the
fabric includes this type of switch.
Enables fine tuning for a specific application by configuring the
parameters for eight virtual channels.
Specifies that Fabric Access Notification frames be sent to public loop
devices to notify them of their node ID and address.
Issues a Remote State Change notification, following the completion
of loop initialization, when FL_Ports detect the presence of new
devices or the absence of preexisting devices.
Check box to specify that AL-PA is not allowed.
Dynamically enables or disables a server that returns information
about system operation information through remote procedure calls.
Check box to enable rapid system service.
Dynamically enables or disables a server that returns information
about the user who is logged into the system through remote procedure
calls.
Check to enable RLS Probing services.
Web Tools User's Guide