HP StorageWorks 8B - FC Entry Switch User Manual page 33

The Zoning Selection menu displays, as shown in Figure 3-6.
Note:
Figure 3-6
When administering Zoning, the following steps are recommended:
1. Define zone aliases to establish groupings.
2. Add zone members.
3. Place zones into one or more zone configurations.
4. Enable one of the zone configurations (only one can be enabled at a time).
There are three separate methods for adding members to a zone
•
A Member
•
A Zone
•
A Configuration
For more information about configuring Zoning, see the Zoning User's Guide.
A description of each of the zoning schemes is shown in Table 3-1.
Web Tools User's Guide
For information specific to QuickLoop to be available, the QuickLoop switch must be
the local domain.
Zoning Selection View
3
Fabric View
3-11