Originals Of Different Widths - Kyocera TASKalfa 620 Operation Manual

Copying Functions

Originals of Different Widths

Place all originals of different widths.
NOTE: This setting is only available for metric models.
The supported combinations of originals are as follows.
•
•
•
NOTE: Place originals flush against the document width guide toward the back of the copier.
IMPORTANT: When placing the originals of different width, be sure to place the edge of originals
flush against the document width guide toward the back of the copier. Failure to place originals
correctly may result in copying errors.
1-54
A3, B4, A4 and B5
B4, A4R and B5
Folio, A4R and B5R