One-Sided Copying Or Duplexing - Kyocera TASKalfa 620 Operation Manual

Copying Functions
3
Press [Close].

One-Sided Copying or Duplexing

Select one-sided copying or duplexing as follows.
1
On the [Basic] screen, press
[1 sided/2 sided] ([1-sided/2-sided]).
NOTE: The setting for one-sided
copying or duplexing applies to all
other steps. Simply complete this
setting once as an initial step.
2 Press [1 sided Copy] ([1-sided Copy]) or
[2 sided Copy] ([2-sided Copy]) and
select the binding direction.
Follow the instructions on the right side
of the touch panel and confirm the
orientation of the originals.
NOTE: Failure to place originals
correctly may result in copying errors.
3
Press [Close].
1-68
Ready to Job build.
Place originals then press Start key .
Job Build Step
1 sided 2 sided Copy
11x8½"
Paper Original 1 sided/
Type
Selection 2 sided
Auto % Top Edge Top
Original
Finishing Zoom
Orient.
Basic
Quality
Ready to Job build.
Place originals then press Start key.
1 sided/2 sided Copy
Finishing
1 sided Binding
Copy
Left
2 sided Binding
Copy Right
Binding
Top
1 sided copy -Left
Finished page #:
Edit
Back
Select Original
Orientation.
Top Edge
Top