Proof Mode - Kyocera TASKalfa 620 Operation Manual

Proof Mode

Delivers a single copy of a high-volume copy job to check before approving the job. If there are any
problems with the copy, simply cancel the job to avoid wasting paper.
Follow the steps as below to check a single copy in a job.
1 Press [Function] and then [
2 Press [Proof Copy] ([Test Copy]).
3
Press [On].
4 Place the originals in the document processor or on the platen. Press the Start key to deliver a test
copy.
5
After delivering the test copy, the
confirmation screen will be displayed.
The copier will remain in standby mode
until the job is approved or cancelled.
Check the test copy.
If it is acceptable, press the Start key to
deliver the specified quantity.
To change the copy quantity, press
[Change Preset].
If there is a problem with the copy, press [Cancel] to redo the copy settings.
Down].
Ready to copy.
Auto Image
Rotation
EcoPrint
Repeat
Copy
Basic
Ready to copy.
Proof Copy
Off
On
f copy.
d retry, press [Cancel].
e to print , press Start key .
APS
Copying Functions
OHP Memo
Proof Copy
Backing Pages
Original Negative Mirror
Orient. Image Image
Output Staple Multi-page
Tray /Punch Form
User choice Program
Function
Shortcut
Proof copy outputs one set for proo
Output Tray
Count/Set
11x8½" Plain
1 sided
Collate Left tray
Change
Preset
Paper Size
11x8
100%
Up
Down
Paper Size
11x8
100%
Back
Cancel
1-41