Kyocera TASKalfa 620 Operation Manual page 69

Complete the Settings Common to All Steps
Specify Duplexing and Repeat Copy.
NOTE: Repeat Copy is used to enable additional copies later.
A variety of other settings and functions are available besides those shown in this example. Refer to
Specifying Copy Functions on page 1-67 for details.
2
Press [1 sided/2 sided]
([1-sided/2-sided]).
3 Press [2 sided Copy] ([2-sided Copy])
and [Binding Left]. Press [Close] to
return to the screen of step 2.
4 Press [Edit]. On the next screen, press
[Repeat Copy].
5
Press [On]. Press [Close] to return to the
screen of step 4.
Ready to Job build.
Place originals then press Start key.
Job Build Step
1 sided 1 sided Copy
11x8½"
Paper Original 1 sided/
Selection Type 2 sided
Auto % Top Edge Top
Original
Finishing Zoom
Orient.
Basic
Quality
Ready to Job build.
Place originals then press Start key.
1 sided/2 sided Copy
Finishing
1 sided Binding
Copy Left
Binding
2 sided
Copy Right
Binding
Top
Ready to Job build.
Place originals then press Start key.
Job Build Step
Auto
Off
Border Original Repeat
Erase Size Copy
Off Off
Margin/ Output
Page #
Centering Tray
Basic Quality
Ready to Job build.
Place originals then press Start key.
Repeat Copy
Off
On
Copying Functions
1 sided copy -Left
Finished page #:
Edit
Back
Select Original
Orientation.
Top Edge
Top
Off
2 sided copy -Left
Tray A
Finished page #:
Edit
Back
When select [On], job can be save
You can recall and re-print at anyt
You can set a password to secure
document .
1-63