Loading Originals; Placing Originals On The Platen - Kyocera ECOSYS M2040dn Operation Manual

Operation on the Machine > Loading Originals

Loading Originals

Load the originals on the platen or document processor, depending on the original size, type, volume, and function.
• Platen: Place the sheet, book, postcards, and envelopes.
• Document Processor: Place the multiple originals. You can also place the two sided originals. (Only on models with a
duplex scanning function.)

Placing Originals on the Platen

You may place books or magazines on the platen in addition to ordinary sheet originals.
2
s
NOTE
For details on Original Orientation, refer to the following:
Original Orientation (page 6-16)
When you place envelopes or cardstock on the platen
2
NOTE
For the procedure for feeding envelopes or cardstock, refer to the following:
When you load envelopes or cardstock in the multipurpose tray (page 5-7)
CAUTION
Do not leave the document processor open as there is a danger of personal injury.
IMPORTANT
• Do not push the document processor forcefully when you close it. Excessive pressure may crack the platen glass.
• When placing books or magazines on the machine, do so with the document processor in the open position.
1
1
1 Put the scanning side facedown.
2 Align it flush against the original
size indicator plates with the back
left corner as the reference point.
5-2
1 Put the scanning side facedown.
2 Align it flush against the original
size indicator plates with the back
left corner as the reference point.