Total Count By Size - Kyocera TASKalfa 620 Operation Manual

Job Accounting
5
Press [Close].
6 Press [Close]. The touch panel will return to the Job Accounting screen.

Total Count by Size, 1-5

You can register specific paper sizes to monitor so that you can check the copy count. You can also
register types of paper.
NOTE: Up to five different paper sizes can be registered for keeping track of the copy count.
If you do not specify the media type, the registered paper size will be counted regardless of the
type. However, if you register a size without specifying the type as the first entry and register the
same size with a type as the second entry, the copy count for the first entry will not include the count
of the second entry.
1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen
on page 4-3.)
2 Press [Job Accntg Def. Set.].
3 Select Total size 1-5 and press [Change
#].
4
Press [On].
5 Press [Select size].
4-26
Job Accounting
Job Accountg T
Total Job Each Job
Accounting Accounting
System Menu
Job Accounting Def set .
Setting Item
Apply Limit Subsequently
Def. Val. of coun. Limit
Total size 1 11x 17"
Total size 2 8½x14"
Total size 3 8½x11"
Total size 4 11x 8½"
Total size 5 5½x8½"
System Menu - Job Accounting - Job Accounting Def set .
Total size 1
Can set totals of paper size and type .
Off
On
System Menu - Job Accounting -
Total size 1
Can set totals of paper size and type.
Paper Size
11x 17"
Select
Off
size
On
System Menu - Job Accounting -
Register/Sett.
Management Job Accntg
Edit Def. Set.
Value
No specif.
No specif.
No specif.
Change #
No specif.
No specif.
Back
Job Accounting Def set .
Back
Media Type
With no
specif .
Job Accounting Def set .