Activating Auto Clear; Prioritizing Copying Over Printing - Kyocera TASKalfa 620 Operation Manual

System Settings

Activating Auto Clear

When this setting is activated, the copier reverts to the state after warm-up if no copies are made.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Auto Clear
and press [Change #].
3
Select [On] or [Off].
4 Press [Close]. The touch panel will return to the Machine Default screen.

Prioritizing Copying Over Printing

You can assign a higher priority to processing copying jobs than printing jobs.
NOTE: Copy Job Priority is displayed when installing the optional printer kit.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [ ] or [ ] to select Copy Job
Priority and press [Change #].
3 Select [On] or [Off].
4
Press [Close]. The touch panel will return to the Machine Default screen.
3-34
System Menu / Counter
Machine Default
Default menu
Date/Time 10/10/08 07 : 03
Time Zone GTM +09:00
Management code change
Auto sleep On
Auto Clear On
System Menu
Auto Clear
Returns to Default automatically after copying is done
or when the set time is passed after the last operation .
Off
On
System Menu - Machine Default
System Menu / Counter
Machine Default
Default menu
Time Zone GTM +09:00
Management code change
Auto sleep On
Auto Clear On
Copy Job Priority Off
System Menu
Copy Job Priority
Make Copy Jobs priority
instead of Print Jobs .
Off
On
System Menu - Machine Default
Setting mode
Change #
Back
Setting mode
Change #
Back