Programmed Copying; Registering Programs - Kyocera TASKalfa 620 Operation Manual

Programmed Copying

Registers combinations of up to eight copy modes and functions displayed on the operation panel
as a single program. After registering sets of frequently used functions as a single program, you can
simply press the program number as needed to recall those functions. You can also name the
programs to identify them.

Registering Programs

Follow the steps as below to register programs.
1 Access the copy mode to register (e.g., five sets of copies, Collate mode, or Margin mode) and
press [Program].
2 Press [Register].
3 Press a number (1 to 8) for the program
number.
4 Enter the program name and press
[End].
NOTE: For instructions on entering
characters, refer to Entering
Characters on Touch Panel on
page 3-55.
5 Press [Yes] to register the program.
to copy.
User choice Function
Register present setting
Select program number .
No registration No registration
No registration No registration
No registration No registration
No registration No registration
Name to display
Capital Letter Num./Sym.
Register program.
Program #
Program name
The set program is registered . Is it correct?
Yes
Copying Functions
Paper Size Set
11x8½"
100%
Reg./Delete
4 in 1
Register
Margin
Left
Bord Erase
Delete
Sheet
Change
Name
Program
Stop
Char .Limit:16 including #
AllDel .
Space
No
De
1-57