Paper Selection - Kyocera TASKalfa 620 Operation Manual

23
All originals have been scanned. Press [Scanning finished] to start the job.
24 If there are no problems with the accomplished copies, you can use Repeat Copy to produce
additional copies in the desired quantity as needed. Refer to Repeat Copy on page 1-42 for details.
You are now completed programming a copy job with job build.
Specifying Copy Functions

Paper Selection

Select the paper size as follows.
1 On the [Basic] screen, press [Paper
Selection].
2 Select the MP tray or a cassette and
press [Close].
Types of Originals
Select originals that are one-sided or two-sided, have facing pages like books or magazines, or are
like multi-page business forms.
1 On the [Basic] screen, press [Original
Type].
2 Based on the originals to be placed,
select [1 sided] ([1-sided]), [2 sided]
([2-sided]), [Book], or [Multi-Page Form]
([Multi-Page Forme]).
NOTE: When selecting [2 sided]
([2-sided]), check the binding direction
and be sure that the originals are
placed in the correct orientation.
When selecting [Book], be sure that the
binding direction is correct.
Ready to Job build.
Place originals then press Start key .
Job Build Step
1 sided 2 sided Copy
11x8½"
Paper Original 1 sided/
Type
Selection 2 sided
Auto % Top Edge Top
Original
Finishing Zoom
Orient.
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Paper Selection
11x8½"
Plain
11x8½"
Recycled
11x17" MP tray
Plain
Color
8½x11"
Plain
Ready to Job build.
Place originals then press Start key .
Job Build Step
1 sided 2 sided Copy
11x8½"
Paper Original 1 sided/
Type
Selection 2 sided
Auto % Top Edge Top
Original
Finishing Zoom
Orient.
Basic
Quality
Ready to Job build.
Place originals then press Start key .
Original Type
Multi-page
1 sided
Form
2 sided
Book
Copying Functions
1 sided copy -Left
Finished page #:
Edit
Back
1 sided copy -Left
Finished page #:
Edit
Back
1-67