Copying Functions
Originals of Different Widths
Place all originals of different widths.
NOTE: This setting is only available for metric models.
The supported combinations of originals are as follows.
•
•
•
NOTE: Place originals flush against the document width guide toward the back of the copier.
Follow the steps as below for automatic paper selection.
1
Place originals in the document processor.
IMPORTANT: When placing the originals of different
widths, be sure to flip up the original guide on the
document processor.
1-54
A3, B4, A4 and B5
B4, A4R and B5
Folio, A4R and B5R