Default Margin; Erasing Borders - Kyocera TASKalfa 620 Operation Manual

Default Margin

Specifies the default margins for copying.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Default margin
width and press [Change #].
3
Press [ ], [ ], [ ] and [ ] to specify
the default margin for each side.
The range for the margins is as follows.
Setting Range
Inch models
Metric models
4
Press [Close]. The touch panel will return to the Copy Default screen.

Erasing Borders

Specifies the width for erasing borders.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Default erase
width and press [Change #].
System Menu / Counter
Copy Default
Default menu
Adj. Manual dens.(Photo)
Zoom
Collate/Offset
Auto Image Rotation
Default margin width
System Menu
Default margin width
Adjust default setting of margin width .
System Menu
0 to 3/4" (in 1/8" increments)
0 to 18 mm (in 1-mm increments)
System Menu / Counter
Copy Default
Default menu
Zoom
Collate/Offset
Auto Image Rotation
Default margin width
Default erase width
System Menu
Setting mode
Standard
100%
Collate:On/Offset:Off
Rotate
Left ¼ " 0 "
Front page
(0 ¾)
0
"
(0 ¾)
¼
"
Left
- Copy Default
Setting mode
100%
Collate:On/Offset:Off
Rotate
Left ¼ " 0 "
Border ¼ " Gutter ½ "
System Settings
Change #
Back
Change #
3-15