Density Steps - Kyocera TASKalfa 620 Operation Manual

System Settings
3
Select [Manual] or [Auto].
4 Press [Close] to finalize the setting or [Back] to cancel the setting. The touch panel will return to the
Copy Default screen.

Density Steps

You can change the number of intermediate steps for manual adjustment of density. Selecting
[1 step] provides 7 steps of slider positions. Selecting [0.5 step] provides 13 steps of slider position
for finer adjustment of density.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Density Steps
and press [Change #].
3
Select [1 step] or [0.5 step].
4 Press [Close]. The touch panel will return to the Copy Default screen.
3-4
Density Mode
Select default mode of density , auto or manual.
Manual
Auto
System Menu - Copy Default
System Menu / Counter
Copy Default
Default menu
Density Mode Manual
Density Steps 1 step
Original Image Text + Photo
Off
EcoPrint
Background Density Adj . Standard
System Menu
Density Steps
Select step of density .
1 step
0.5 step
System Menu - Copy Default
Back
Setting mode
Change #
Back